Email Collins Reinforcements Limited
Home Company information BS 8666 bends & shapes BS 4466 bends & shapes Fabric reinforcement Reinforcement accessories

Fabric reinforcement to BS 4483:2005

Standard Sheet Size 4.8m Long x 2.4m Wide
Type BS Reference Mesh Sizes
Nominal Pitch
of Wires		 Wire Sizes Cross Sectional
Area Per
Metre Width		 Weight
Per m²		 Sheets
Per
Tonne		 Sheet
Weight
    Main
mm		 Cross
mm		 Main
mm		 Cross
mm		 Main
mm		 Cross
mm		 kg   kg
SQUARE MESH FABRIC : 200mm x 200mm                
  A393 200 200 10 10 393 393 6.16 14 70.96
  A252 200 200 8 8 252 252 3.95 22 45.50
  A193 200 200 7 7 193 193 3.02 29 34.79
  *A142 200 200 6 6 142 142 2.22 39 25.37
STRUCTURAL MESH FABRIC : 200mm x 200mm                
  B1131 100 200 12 8 1131 252 10.90 8 125.57
  B785 100 200 10 8 785 252 8.14 11 93.57
  B503 100 200 8 8 503 252 5.93 15 68.31
  B385 100 200 7 7 385 193 4.53 20 52.19
  B283 100 200 6 7 283 193 3.73 24 42.97
LONG MESH FABRIC : 100mm x 400mm                
  C785 100 400 10 6 785 70.8 6.72 13 77.41
  **C636 100 400 9 6 636 70.8 5.55 16 63.94
  C503 100 400 8 6 503 70.8 4.51 19 52.96
  C385 100 400 7 6 385 70.8 3.58 24 41.24
  C283 100 400 6 6 283 70.8 2.78 31 32.03
WRAPPING FABRIC : 100mm x 400mm                
  D98 200 200 5 5 98 98 1.54 57 17.74
  D49 100 100 2.5 2.5 49.1 49.1 0.77 113 8.87
   * Also available in 3.6m Long x 2.0m Wide sheets, 50 per bundle.
** This fabric is available for use in road construction and is not normally held in stock.

Cut and bent fabric reinforcement

We specialise in the manufacture of cut and bent fabric reinforcement from standard 4.8m x 2.4m sheets to BS8666 to suit customer requirements. Fabrics can be bent to the majority of shapes in BS8666.

Typical examples of cut and bent fabric reinforcement are shown below